Educational software for students

Negarmooz software; is the most practical educational software for automotive electrical and injectors.

To view the software demo, enter the username and password below and enter the Negarmooz demo section:

user: trial

password: negarkhodro

To purchase software packages, contact NegarKhodro sales representatives in your province.

To use the Negarmooz web app on your computer and mobile phone, click here.

Note: To use Negarmooz on your computer and Android phones, be sure to use the Chrome browser, and to use Negarmooz on your iPhone, be sure to use the Safari browser.

Changes in this version:

♦ Improved list of domestic vehicle ramp and tuning training packages, which includes the following:

♦ ECU: EZAM
Tables: Torque and torque tables, fuel injection tables, lambda tables, starting the process, ramp - familiarity with tables, cutoff, idle speed change, idle speed change, coil charging

♦ ECU: AECS
Tables: Spark advance tables, Torque and torque tables, fuel injection tables, lambda tables, electric throttle, starting the ramp process - familiarity with tables, intake air tables, gas pedal tables

♦ ECU: S2
Tables: Spark advance tables, Torque and torque tables, lambda tables, electric throttle, explanations about settings (harmonic-sine, etc.), starting the ramp process - familiarity with tables, 2D diagram - how to change - checking the amount of changes, cutoff, idle speed change, eliminating throttle and gas pedal delay

♦ ECU: S2000
Tables: Cutoff, Water Temperature Reduction, Idle Speed ​​Change, Cold Start Fix, Burst Cutoff

♦ ECU: BOSCH ME 7.4.4
Tables: Spark Advance, Crack and Torque Tables, Lambda Tables, Electric Throttle, Cutoff, Water Temperature Reduction, Idle Speed ​​Change, Throttle Delay Fix

♦ ECU: SSAT
Tables: Spark Advance Tables, Crack and Torque Tables, Fuel Injection Tables, Lambda Tables, Ramp Process Start - Getting to Know the Tables, Cutoff, Water Temperature Reduction, Burst Cutoff, Fixing Misfire Error, Idle Air Intake Tables, Speed ​​Limit

♦ ECU: KESENS
Tables: Fuel Injection Table, Ramp Process Start - Getting to Know the Tables, 2D Diagram - How to Change - Checking the Amount of Changes, Idle Speed ​​Change, Sending to Repair Shop, Cap Fix

♦ ECU: SIEMENS
Tables: Cutoff, Temperature Reduction Water, Idle speed change, Oxygen sensor removal, Cold start fix, Burst cutoff, Misfire error fix, Speed ​​limit, Calibration

♦ ECU: BOSCH ME17
Tables: Spark advance tables, Crack and torque tables, Fuel injection tables, Lambda tables, Electric throttle, Starting the ramp process - Getting to know the tables, 2D diagram - How to change - Check the amount of changes, Cutoff, Water temperature reduction, Gas pedal table

♦ ECU: LZNF
Tables: Cutoff, Water temperature reduction, Idle speed change

♦ ECU: BOSCH ME 7.4.5
Tables: Spark advance table, Crack and torque table, Lambda table, Electric throttle, Idle speed change, Launch control, Misfire error fix, Gas pedal table

♦ ECU: MAW1001
Tables: Cutoff, Idle speed change, Burst cutoff, Launch control

♦ ECU: J34
Tables: Cutoff, Water Temperature Reduction, Idle Speed ​​Change

♦ ECU: BOSCH 7.9.7
Tables: Starting the Ramp Process - Familiarizing Yourself with Tables, Idle Speed ​​Change

♦ ECU: EZU
Tables: Cold Start, Cutoff, Fan Temperature, Idle Speed, Misfire

♦ ECU Repair Module:

♦ Added AECS Manual ECU

♦ Added EZU ECU

♦ Added EASY U2.8 ECU

♦ Added Gharb Steel MAW 1002 ECU

♦ Added Gharb Steel MAW 1003 ECU

♦ Added Bosch M7.9.7 ECU

♦ Added J35 ECU

♦ Added SSAT NO FLASH ECU

♦ Added L90 Auto ECU